Permanent magnet drum magnetic separator mainly composed of cylinder, roller, brush roller, magnetic system, tank, transmission parts 6 parts. Cylinder by a 2-3mm stainless steel plate welded into a tube, the end
Cover of cast aluminum parts or workpieces are connected with stainless steel screws and barrel. Motor through reducer or directly with the stepless speed motor, drive cylinder, magnetic roller and brush roll for back transfer
Action.Magnetic Grate is an open magnetic system, installed in the cylinder and exposed full magnetic. Magnetic block with stainless steel bolts mounted on the bottom plate of the yoke, the yoke of the shaft extension tube, the solid shaft
Given a crank arm. Pulling the crank arm can be adjusted declination magnetic system, can be used after appropriate adjustment lever fixed. The working area of the tank with a stainless steel plate rack and slot body
Other parts with ordinary steel welding.
Magnetic separator magnetic pole magnetic system with five parts, each composed of ferrite and NdFeB permanent magnet pole pieces bonded together with a screw through the center hole fixed magnetic block magnetic guides
, The magnetic guide plate through the axis of the cylinder bracket, magnetic system fixed, the cylinder rotation. Magnetic poles alternately arranged along the circumference, in the axial direction of the same polarity. Set in the magnetic system
Out of non-magnetic material is made of stainless steel drum using a non-magnetic material in order to avoid magnetic field lines can enter the cylinder through the selected partition and the cylinder forming a magnetic
Short circuit. Tank near the site of the magnetic system should also be non-magnetic material, and the remaining use of ordinary steel or rigid plastic panels. For example Yantai Xinhai Mining Machinery permanent magnet drum magnetic separator
Machine has a simple structure, Magnetic Rods reliable operation, saving power consumption, suitable for on-site, etc., it is widely applied.
Permanent Magnet
没有评论:
发表评论