2013年8月25日星期日

Magnechuck

1, spring cable reels for a variety of mobile AC 500V electrical equipment.
2, cable coiling length of L whichever way installation with cable lengths are as follows:
(1) A is L +3 ring mode
(2) B is the way l + h +3 laps (where h values ​​must be indicated when ordering).
(3) means C, D in, L + H + h +3 laps.
(4) means E, F, determined according to the user site, specify when ordering.
3, methods in C reel fixed on the ground, close, put the cable, the cable there is a relatively friction magnetic bar with the ground, this time in the laying of the cable trajectory within the raceway to reduce cable wear.
4, method F in the general admission H = 0.14L, h = 0.5H, if H <0.14L, h <0.5H, the order must specify H, h values.
5, cable reel for the single-beam with electric hoist travel together with use, can rationing special roller bracket parts to install and use.
6, closing the cable reel, put direction Dimensions has been marked. Special requirements must be stated when ordering.
7, Dimension table "quality" of a column, not including cable quality.
8, the electric reel structure to cantilever-based (generally not labeled).
9, the special type of reel, special-purpose products, please come letter users to discuss.

MW16, MW96, MW26 MW36 series lifting electromagnet is lifting steel coil steel coil electromagnet with a movable pole, suitable for lifting steel strip coils. There are three kinds of structure.
1 vertical lifting type. Grate Magnet MW26, MW36 magnet adsorption volume strip end (figure B side) into a convex line, concave, Yamagata, whose height difference δ> 25mm, if the vertical lifting, stretching up and down freely available as pole electromagnet can be very Good and steel strip coils face contact, play lifting capability.
Two horizontal lifting type, WM16 series of curved steel strip coils electromagnet adsorption side.
3 Universal. MW96 lifting vertically, but also horizontally lifting.

没有评论:

发表评论