Permanent Magnet
2013年9月3日星期二
A drum-type magnetic separator
Magnetic separator can effectively remove the cooling fluid in the iron, consumes no filter. Easy to install, can be used with other forms such as the filter drum (drum) paper filter, flat comb paper filter, vacuum-type paper filter used in combination. Magnetic separator can be used according to customer requirements ferrite magnets, NdFeB or Alnico. Magnetic separator housing made of high quality materials, depending on the circumstances of carbon steel or stainless steel. Magnetic Separator Application: widely used in grinding coolant adsorption separation of impurities. In the painting, phosphating, cold and other industries have also been applied. Particularly suitable for CNC machine, EDM machine, polishing machine, Magnetic Rods gear cutting machines, grinders and other produce in the process of cooling liquid iron particles using the occasion. Magnetic Separator role: coolant consumption can be reduced so that the cooling pump, tool life increased. Workpiece surface quality Ra value can be increased by 30% for work, impurities easy to discharge machine maintenance time reduced by 50% Easy to install and no consumption of magnetic separator filter Main features: ● According to impurities in the coolant and oil situation morphological optional roller and comb-type magnetic separator magnetic separator ● roller type magnetic separator according to site specific conditions and an optional built-in motor ● To facilitate external adsorbed on the surface of the magnetic impurities fully falling, cot inner magnet type magnetic separator by a strong magnetic force can be designed into the structure of the fade, only the outer cylinder turn, reduce power consumption, energy saving significant. ● magnetic type comb Tooth type magnetic separator surface plus optional scraper conveyor mechanism and hydraulic flushing device to completely eliminate impurities, debris deposited solve the problem; For better drained moisture, comb-type magnetic separator level control switch also optionally add or time relay to make the gear motor intermittent operation ● For the convenience of customers using a magnetic separator into the water can be designed to last into the water or back into the water, the water can be designed around and under the water ● magnetic separator standalone traffic from 25 l / assigned to 4500 liters / min ● Three-phase geared motor voltage is 380 or 220 volts, geared motor according to user requirements placed on the right or left side ● PLC automatic control and manual control in two ways
Drum - the use and protection
Drum is a key component of the camera, and the drum performance has a direct impact on the quality of the image after recording, so we use it to pay attention to protect. The drum has a head designed to detect the rotational phase of the PG video signal magnetic tip and a rotor mounted on the outer cylindrical surface of the drum motor of the two magnets of opposite polarity, and when the head and the magnet is damaged or bad, PG head available mono recorder instead of the recording head; magnet magnet can be used instead of (with tape glue). But pay attention to the polarity of the magnet to match; distance and position the head to the right.
Drum
In order to Magnetic Rods extend the service life of the drum, we have to do:
First, do not use in dusty places great camera.
Second, do not try to touch the drum surface, or is likely to cause damage to the head.
Third, we want to use the manufacturer's recommended use of the cleaning cartridge.
Fourth, the inferior surface of the tape on the head in terms of like a sandpaper, and old tape dropouts can cause serious head clogging, so we do not use inferior and obsolete tape.
Going out shooting, drum jams are likely to occur, in general we can through the following methods to clean the dirt on the drum.
First, the normal processing mode. We can make the camera enters playback status, remove the tape and put into cleaning tape, then press the playback button, about ten seconds or so cleaning can be, this is a more thorough cleaning method.
Second, the simple approach. When using this method, we must first stop the camera into playback mode, press PLAY playback button, then press REW quick search key, so that the relative speed of the drum with the highest tape, lasted about 15-20 seconds. and then back to the camera state, to find just the end of the recording, then we can continue a normal camera. Often this method is suitable for tape is relatively new and usually very careful to use the machine's environment.
Third, other magnetic name tag treatment methods. When out of the house forgot and easy handling and cleaning does not work, we can get a new tape into the cassette in the camera state to open menus to adjust to the LP mode, then remove the menu, press the camera button camera, About 10-30 minutes later and the machine can be a normal camera up. When the checks have been after a good cleaning, but also to re-adjust to the SP mode in order to get a better film quality.
Drum
In order to Magnetic Rods extend the service life of the drum, we have to do:
First, do not use in dusty places great camera.
Second, do not try to touch the drum surface, or is likely to cause damage to the head.
Third, we want to use the manufacturer's recommended use of the cleaning cartridge.
Fourth, the inferior surface of the tape on the head in terms of like a sandpaper, and old tape dropouts can cause serious head clogging, so we do not use inferior and obsolete tape.
Going out shooting, drum jams are likely to occur, in general we can through the following methods to clean the dirt on the drum.
First, the normal processing mode. We can make the camera enters playback status, remove the tape and put into cleaning tape, then press the playback button, about ten seconds or so cleaning can be, this is a more thorough cleaning method.
Second, the simple approach. When using this method, we must first stop the camera into playback mode, press PLAY playback button, then press REW quick search key, so that the relative speed of the drum with the highest tape, lasted about 15-20 seconds. and then back to the camera state, to find just the end of the recording, then we can continue a normal camera. Often this method is suitable for tape is relatively new and usually very careful to use the machine's environment.
Third, other magnetic name tag treatment methods. When out of the house forgot and easy handling and cleaning does not work, we can get a new tape into the cassette in the camera state to open menus to adjust to the LP mode, then remove the menu, press the camera button camera, About 10-30 minutes later and the machine can be a normal camera up. When the checks have been after a good cleaning, but also to re-adjust to the SP mode in order to get a better film quality.
2013年8月30日星期五
permanent magnet drum magnetic separator - Structure
Permanent magnet drum magnetic separator mainly composed of cylinder, roller, brush roller, magnetic system, tank, transmission parts 6 parts. Cylinder by a 2-3mm stainless steel plate welded into a tube, the end
Cover of cast aluminum parts or workpieces are connected with stainless steel screws and barrel. Motor through reducer or directly with the stepless speed motor, drive cylinder, magnetic roller and brush roll for back transfer
Action.Magnetic Grate is an open magnetic system, installed in the cylinder and exposed full magnetic. Magnetic block with stainless steel bolts mounted on the bottom plate of the yoke, the yoke of the shaft extension tube, the solid shaft
Given a crank arm. Pulling the crank arm can be adjusted declination magnetic system, can be used after appropriate adjustment lever fixed. The working area of the tank with a stainless steel plate rack and slot body
Other parts with ordinary steel welding.
Magnetic separator magnetic pole magnetic system with five parts, each composed of ferrite and NdFeB permanent magnet pole pieces bonded together with a screw through the center hole fixed magnetic block magnetic guides
, The magnetic guide plate through the axis of the cylinder bracket, magnetic system fixed, the cylinder rotation. Magnetic poles alternately arranged along the circumference, in the axial direction of the same polarity. Set in the magnetic system
Out of non-magnetic material is made of stainless steel drum using a non-magnetic material in order to avoid magnetic field lines can enter the cylinder through the selected partition and the cylinder forming a magnetic
Short circuit. Tank near the site of the magnetic system should also be non-magnetic material, and the remaining use of ordinary steel or rigid plastic panels. For example Yantai Xinhai Mining Machinery permanent magnet drum magnetic separator
Machine has a simple structure, Magnetic Rods reliable operation, saving power consumption, suitable for on-site, etc., it is widely applied.
Cover of cast aluminum parts or workpieces are connected with stainless steel screws and barrel. Motor through reducer or directly with the stepless speed motor, drive cylinder, magnetic roller and brush roll for back transfer
Action.Magnetic Grate is an open magnetic system, installed in the cylinder and exposed full magnetic. Magnetic block with stainless steel bolts mounted on the bottom plate of the yoke, the yoke of the shaft extension tube, the solid shaft
Given a crank arm. Pulling the crank arm can be adjusted declination magnetic system, can be used after appropriate adjustment lever fixed. The working area of the tank with a stainless steel plate rack and slot body
Other parts with ordinary steel welding.
Magnetic separator magnetic pole magnetic system with five parts, each composed of ferrite and NdFeB permanent magnet pole pieces bonded together with a screw through the center hole fixed magnetic block magnetic guides
, The magnetic guide plate through the axis of the cylinder bracket, magnetic system fixed, the cylinder rotation. Magnetic poles alternately arranged along the circumference, in the axial direction of the same polarity. Set in the magnetic system
Out of non-magnetic material is made of stainless steel drum using a non-magnetic material in order to avoid magnetic field lines can enter the cylinder through the selected partition and the cylinder forming a magnetic
Short circuit. Tank near the site of the magnetic system should also be non-magnetic material, and the remaining use of ordinary steel or rigid plastic panels. For example Yantai Xinhai Mining Machinery permanent magnet drum magnetic separator
Machine has a simple structure, Magnetic Rods reliable operation, saving power consumption, suitable for on-site, etc., it is widely applied.
订阅：
博文 (Atom)