2013年8月16日星期五

cable reels introduction and description

1, the company can design and manufacture all kinds of cable reels, signal reel, hose (conveying gas or liquid) roll. <br />
2, cable lighter, shorter distance, commonly used as a power scroll spring, the heavier weight of the cable, the moving distance is longer, generally adopts torque motor or three-phase asynchronous motors (hysteresis) as the driving force. According to the magnetic hooks situation, but also use external drive or a hammer as a driving force. <br />
3, the winding length of the cable installation drawing of the "L" as the basis, with a cable length, respectively: (1) mode A is L +3 ring; (2) method B is the L + h +3 ring ; (3) mode C, D for L + H + h +3 laps; (4) mode E, F, determined according to the user site, specify when ordering. <br />
4, mode C in reel fixed on the ground, close, put the cable, the cable and the relative motion between the ground. In this case, the trajectory of the cable laying within the raceway to reduce cable wear. <br />
5, generally by way of F H = 0.14L. h = 0.5H considerations, such as H <0.14L, h <0.5H, then the order must specify H, h values. <br />
6, the cable reel mounted on a single beam for driving with electric hoist equipped with time, can be accompanied by a special roller bracket assembly to install and use. <br />
7, the cable reel "cable Dry Magnetic Separator exit direction" in Dimensions, as indicated, any special requirements please specify. <br />
8 Dimensions of the table indicate the weight, not including cable (duct) weight. <br />
9, and hysteresis torque motor type structure in the form of roll-type cantilever type in the product is not indicated. <br />
10 samples of four core cable reels are equipped with three-phase motor is used to supply power if used to give two sets of electromagnets, then the four-core cable with the same cross-sectional area should be. <br />
11, cable lengths over 30 meters (including 30 meters), cable users themselves.

没有评论:

发表评论