the structural characteristics of the magnetic drum

Magnetic drum mainly used to remove powder, flake and granular ferromagnetic impurities in the raw materials, widely used in ceramics, electricity, mining, plastics, chemicals, rubber, pharmaceutical

, Food, environmental protection, pigments, dyes, electronics, metallurgy and other industries. To enable customers to better understand the magnetic roller, magnetic roller detailed overview of the following structural features:
Magnetic drum including oil cooling motor, gear box, electric drum shell and shaft, oil-cooled electric suspended magnet motor mounted on the shaft, the shaft ends with electric roll through the end cap

Cylindrical shell is connected at both ends, oil cooler motor output shaft via a reduction mechanism with fixed electric drum shell wall flange ring gear meshing, the electric drum shell

Is fixedly connected with the outer wall of the magnet installation even polygonal tube, the mounting tube outer sides of the polygon of even non-magnetic screws are connected by a permanent magnetic strip, and each of the permanent magnetic strip

Multiple magnetic polarity neodymium ring magnet direction stacking block close abutment, each of the two adjacent magnetic polarity opposite to the magnet even polygonal periphery of the mounting cylinder and has non-magnetic

Magnetic stainless steel cylinder, the cylinder ends through non-magnetic stainless steel cover and electric drum is connected to both ends of the outer wall of the housing. Alternatively, you can directly to the electric drum shell

Even polygonal outer wall to the other structure unchanged.

resolve to withstand greater fluctuations in ore and quartz ore slurry separator effective measures

Magnetic separator beneficiation production equipment is indispensable to use tools, quartz ore magnetic separator equipment service production to meet production requirements. Quartz ore magnetic separator market

Needs, determine the development of industry, which is slowly took a few years of industrial rapid development of a new attitude, speed up the pace of modernization. Quartz ore magnetic separator can sorting

Many minerals, such as: magnetite, suspended magnet limonite, hematite, manganese, siderite, ilmenite, wolframite, manganese carbonate, manganese, metallurgical manganese ore, manganese oxide, iron

Sands, kaolin, quartz rare earth ore mining and so can be used to select another separator. Cylinder by a 2-3mm stainless steel plate welded into a tube, cover the cast aluminum parts, stainless steel screws

And the tube is connected. Progressive processing product quality, reduce costs, improve production efficiency.

     Quartz ore magnetic separator beneficiation operations according to demand in the industry, applications should meet some of the characteristics of the industry in order to better carry out processing operations, quartz ore magnetic separator

Equipment and technology with industry applications, according to the technical characteristics of the beneficiation process, it has a kind of industry demand, quartz ore magnetic separator as a mineral processing equipment, according to the

Processing operations to the actual needs, and its magnetic separation process should have the characteristics of what conditions do the following for you to analyze in detail the quartz ore magnetic separator technical characteristics, with the

IDM operating conditions.

     Quartz ore magnetic Neodymium Motor Magnet is widely used in the chemical industry, building materials, refractory plants, power plants and other industries has a significant role, with its high efficiency, low investment, appropriate

Should be strong, simple structure, large capacity, easy to operate, easy to maintain, low grade tailings recovery of higher strengths, our customers of all ages.

     Tailings eliminate the system's role is to choose to go iron sand routed away from the tail where the machinery in order to ensure the normal work of the mechanical energy. Motor through reducer,

Driven cylinder for rotary motion. Beneficiation production line is now commonly used in quartz ore magnetic separator equipment is mainly used in the re-use powdered iron removal mitochondria, etc. The device is also

It can be widely used for recycling, timber, mining, ceramics, chemicals, food and other plants, together for the granularity below 3mm magnetite, pyrrhotite, roasted ore

, Ilmenite and other materials, magnetic separation, but also for coal, non-metallic minerals, building materials and other materials, iron homework, it can be said that the device is the industry's most widely used high versatility

One of the models, quartz mineral ore magnetic separator strive China's rookie.

    Quartz ore mining mineral separator equipment is essential for the production of equipment, the use of magnets of different magnetic materials magnetic system for sorting, Henan Yu Fasheng quartz ore production

Strong magnetic separator equipment for mineral materials adaptable, so its wide range of applications. Quartz ore magnetic separator equipment quality is every vendor can not be ignored, a

Once a quality problem, its impact and the loss is unthinkable. In any period will not relax on quartz ore magnetic separator equipment quality control and attention

Doing so is not only responsible for the majority of customers, but also on their own responsibility, socially responsible.

    Quartz ore magnetic separator needs a lot of technical operating conditions, according to the actual needs of processing operations, quartz ore magnetic separator tailings flow channel division is run after overflow

Fine-grained or fine mud tailings and tailings underflow orifice then ran coarse rock gangue, suitable for roughing coarse magnetite slurry has a particle size distribution is very wide, coarse vary widely

Or the characteristics of a high clay content, Oita sorting room, high-mineral surface, multi-tail flow channel, the quartz ore magnetic separator can withstand large amounts of ore slurry volume and volatility.

limonite magnetic separator magnetic materials research breakthroughs on the continuous optimization

Permanent magnetic drum magnetic separator device can replace the application of the process, with the domestic and foreign mining companies in the automatic control technology and control technology, mining equipment manufacturing

Level of automation is also a corresponding increase, and magnetic separation equipment in the field of magnetic mineral separation hamper the accuracy requirements are also increasing. When dry magnetic separator should have enough open gear

Enough oil, while bearing suspension magnets cap hole injection, then at least once every three months have oiling, as this will ensure the life of the machine, cost savings while improving the efficiency

Rate.

Both uses magnetic source is not the same, weak magnetic separation equipment to use more permanent magnets for magnetic source, mainly from the energy departure. The strong magnetic field magnetic separation equipment to use electromagnetic

Magnetic source, which is the electromagnetic field strength of the magnetic source can be designed very high, and generally low field strength of the permanent magnet, the magnetic field strength may not meet the requirement. Adoption

Permanent magnet strong magnetic separator, requires the use of new high-performance permanent magnets. With the domestic research breakthroughs magnetic, magnetic separation equipment industry as well as the traditional permanent magnetic separator

Magnetic system and the body structure of the continuous optimization, upgrade and improve, speed up the permanent magnetic separator device and gradually replace the electromagnetic suspended magnet process of magnetic separation equipment.

Always check the wear layer on the cylinder case. For loosening or breakage, timely disposal and repair, when the repair time, tailings recycling machines decapitated at this time

Of the strip and the cylinder surface should be sanded clean, and then use the glue stick firmly.

With the social development of science and technology, the emergence of high-performance permanent magnet materials, machining technology is getting more sophisticated, assembly and automation technology continues to improve control technology

Continuous improvement and promotion, combined with the practical needs of mine production, making the magnetic separation equipment upgrades further accelerated. Equipment automation technology; automation technology

Accelerate the industrial development especially in the increase in productivity, and therefore magnetic separator automation technology to meet the need to constantly reinforce the need for automated production of mining enterprises.

Under normal circumstances, it should be ready to remove the pulp of wire rod head or the like, so in order to avoid a small amount to the mine when the time, these things may be with or without

Up, then the drum skin will soon be worn or scratched on production and costs are negative. At this point if there is foreign matter on a cylinder, you can stop time by observing both ends

Hole inspection. Since large-scale magnetic separation equipment cause of the rapid development of mining and the production of construction on the increased demand for mineral resources, mining equipment manufacturing industry are not

Constantly expanding, difficult to adapt to face common equipment and gradually expand the production capacity of the mine situation, mining equipment manufacturer dedicated to the research and production of large-scale magnetic separation equipment

.

Updating of equipment; ensure good lubrication is the key to extend its service life. Dry magnetic separator when open gear lubricant should be sufficient,

While bearing cover hole injection, then at least once every three months, you have to grease, as this will ensure the life of the machine, saving costs while improving efficiency.

Magnetic Separator in rougher tailings slurry with a high concentration when the characteristics of understanding, under normal circumstances, it should be ready to remove the pulp of wire rod head or the like

So in order to avoid a small amount to the mine when the time, these things may not come up with, then the tube will soon be worn or scratched leather production and cost are negative. This

When the cylinder is a foreign body, you can shutdown observation hole through both ends of the inspection. Ore magnetic separator has the following six characteristics:

1, to the mine rinse water to make a slurry into a high concentration can be diluted and adequate separation, magnetic separation to make a good effect, the magnetic separator for coarse-grained magnetite coarse

Select the slurry having a high concentration feature. Magnetic separator tailings flow channel division is running fine before and after the overflow or fine mud tailings and tailings underflow orifice then ran around coarse particles

Stone dykes, suitable for roughing coarse magnetite slurry has a particle size distribution is very wide, coarse or very different characteristics of the high clay content.

2, the downstream groove, making pulp larger particle size, which does not cause heavy coarse groove plug, suitable for coarse-grained magnetite mineral rougher when coarser features.

3, because the equipment sorting drum surface field strength is high, the pulp can be given directly to the ore bucket sorting higher field strength cylinder surface area, making it difficult to be adsorbed and easy flow of the magnetic

Lost in the coarse tailings iron with the living body, the higher magnetic force can be effectively adsorbed on the surface of separation tube. 4, magnetic separator has a higher surface mine, the larger the magnetic wrap angle

Makes sorting with a long, iron magnetic minerals are adsorbed recovered fully, so magnetic material high recovery rate. Separator applications currently expanding scope and

Mineral separation degree of refinement to improve, the need to strengthen magnetic separator sorting features that make it widely used in various fields, expand the application fields. Always check on the cylinder

The wear layer situation.

5, Oita sorting room, high-mineral surface, multi-tail flow channel, so that magnetic separator can withstand large amounts of ore slurry volume and volatility.

6, for loosening or breakage, timely disposal and repair, when the repair time, tailings recycling machines at this time decapitated cylindrical surface strip and sand should be used

Paper polished clean, and then use the glue stick firmly.

magnetic perpetual motion is it

Magnetic perpetual motion machine is a kind of no electricity without oil, can never stop turning the power machine. Including magnet, impeller and control system of three parts. Characterized by the impeller has to be attracted within the magnetic field, and with the continuous alternating magnetic fields to rotate. Rotation of the impeller and magnetic fields are required power from the alternating magnet has the suspended magnet natural magnetism. One kind of power machine, especially on a magnetic perpetual motion machine, with a magnet, impeller and control system of three parts. Wherein the magnet mounted on the blades of the impeller 13 and the crossbar 2; control system consists of the control lever 3, the spring 9 toothed gear 10, gear lever lever 4 and Annex 5, the lever hook six components. Practice: Method 1: first find two iron plates, together with a transparent adhesive, then two magnets with the same pole stick together, you can make a same-pole magnet, and then a few more, the same pole magnets First aside ...... if not do the same pole magnets, open: http://www.tudou.com/programs/view/TRKjHhjoZFQ/; find a rotating stuff (best side with two bearings), and then glue suspension magnets the same middle-pole magnet (must act in a direction stick, according to the size of this stuff to determine how many of the same pole magnets stick), then let's use a powerful magnet, with the same pole resistance to push the magnet, so that a magnetic perpetual motion machine is complete! Method two: first make a degausser, which then put the pole will suck degaussing, or find a stuff can be transferred, according to a direction of the pole magnet to stick it, then let's use a powerful magnet, with the same pole to promote the resistance of the magnet, so that a magnetic perpetual motion machine and is completed!

effective utilization of resources slag magnetic separator magnetic effect

effective utilization of resources slag magnetic separator magnetic effect

Slag magnetic separator magnetic mineral particles only after magnetic separation. Weakly magnetic minerals and the ferromagnetic minerals due to its chemical composition and crystal structure is different, it is different from the magnetization characteristics

Composed of many magnetic domains, according to market forecasts, our magnetic separator when the 2008 market size of about 11 million, in 2009, China's coal mining and washing industry, the total size of the construction

An increase of 53.1%, 84.4% of Grate Magnet the net increase in built size, showing a strong momentum of growth. If the reduced magnetization H, J magnetization decreases compared, but not along the

The original curve, but is decreased along the curve than the original, if the magnetizing field strength H is reduced to zero, J does not drop to zero, while retaining a certain value Jr, the number of

Value is called remanence, a phenomenon known as hysteresis, J in order to reduce to zero, and needs a reverse magnetic suspended magnet field, the strength of the coercive force Hc is called.

According to various minerals than the susceptibility differences, and different magnetic field strength slag separator machine, generally divided into three categories. Weakly magnetic minerals than the magnetic

Coefficient of 15 - 500 * 10-6 cm 3 / g, such as hematite, limonite, and other methods using magnetic separation recovery. Strong magnetic minerals than the susceptibility greater than 3000 * 10-6

Cm 3 / g, such as magnetite, pyrrhotite, etc., with a weak magnetic separation equipment that is able to effectively separate and gangue minerals. Magnetic minerals than the susceptibility of 500 -

3000 * 10-6 cm 3 / g, such as semi-illusion hematite and ilmenite, etc., with the magnetic field magnetic separation equipment for sorting.

Slag separator Henan Yu Fa Machinery Co., Ltd. is slag beneficiation designed magnetic separation equipment, mineral processing equipment for slag traditional screening inadequate Yu licensing

Slag separator greatly improved the appearance of slag screening efficiency, improve the efficient use of resources, but also by users unanimously approved, are detailed below under the slag magnetic

Sorting machine should be noted that the use of the principles and maintenance measures:

⊙ focus associated with the magnetic machine before and after the device task conditions, especially in front of weakening, slag and other operations must be running. Timing replace oil.

⊙ dielectric plate pleaded not string is not blocked, adhere cleaned once 20 to 30 days, regular replacement dielectric plate (for example, one year or six months depending on the condition of the tooth plate abrasion), and focus on pressure

Cover screws to tighten.

⊙ task focused oil and cooling oil temperature rise is too high to be reported to the workshop director, in order to adopt the necessary measures, such as downtime. Gearhead temperature super-

Limit should immediately report the workshop leader, parking View disposition.

⊙ focus on investigating the oil pressure gauge, pressure gauge, voltmeter, ammeter pointer whether sensitive reading ability to meet requests, identify problems and timely disposal to find relevant personnel.
The so-called slag separator working gap, that is the spacing of the cylinder and the tank. This spacing is the size of concentrate quality factors affecting choose another one. If the slag machine

The gap is too small, that tube skin and too close to the tank, the slurry flow through only did he not affect the processing capacity, and because space is too small, it will make regardless of the size of the magnetic

Particles will get ample opportunity to breathe drum skin. Mainly due to the magnetic field from the pulp is too close, the magnetic field caused by the high strength. However, to reduce tailings grade increase the recovery rate

Is good.

If the spacing is too large, can only make a strong magnetic pick up particles, weaker on the election does not come up, although concentrate grade, but also increases the tailings grade

, Reducing recovery. Therefore, adjust the working gap slag machine is very important. Field production will generally need to be adjusted according to the working gap in the range of 35-60 mm

, The working gap angle bracket can be adjusted to change the bottom gasket gap size.