magnetic liquid trap production process

magnetic liquid trap are engineered to remove ferrous contaminants from liquid and slurry lines. Efficiently remove tramp iron before maintenance and product contamination problems occur. The benefits of this magnetic separator can be experienced in most cases with no appreciable pressure drop or reduction in flow rates. All units incorporate a sump type housing to trap non-ferrous particles. Liquid Traps may be installed horizontally, vertically, or on an angle without affecting their magnetic efficiency.

How does a magnetic trap work

Magnetic trapping is a cornerstone for modern ultracold physics and its applications (e.g., quantum information processing, quantum metrology, quantum optics, or high-resolution spectroscopies). Here a comprehensive analysis and discussion of the basic physics behind the most commonly used magnetic traps in Bose-Einstein condensation is presented. This analysis includes the quadrupole trap, the time-averaged orbiting potential trap, and the Ioffe-Pritchard trap. trap magnets is shown how the trapping conditions and efficiency of these devices can be determined from simple derivations based on classical electromagnetism, even though they operate on quantum objects.

How to Use Magnetic Trap

   The minimum magnitude of the magnetic field can be realized with the "atom microchip".[1] One of the first microchip atomic traps is shown on the right. The Z-shaped conductor (actually the golden Z-shaped strip painted on the Si surface) is placed into the uniform magnetic field (the field's source is not shown in the figure). Only atoms with positive spin-field energy were trapped. magnetic trap To prevent the mixing of spin states, the external magnetic field was inclined in the plane of the chip, providing the adiabatic rotation of the spin at the movement of the atom. In the first approximation, magnitude (but not orientation) of the magnetic field is responsible for effective energy of the trapped atom. The chip shown is 2 cm x 2 cm; this size was chosen for ease in manufacture. In principle, the size of such microchip traps can be drastically reduced. An array of such traps can be manufactured with conventional lithographic methods; such an array is considered a prototype of a q-bit memory cell for the quantum computer. Ways of transferring atoms and/or q-bits between traps are under development; the adiabatic optical (with off-resonant frequencies) and/or the electrical control (with additional electrodes) is assumed.

Performance guarantee magnet control from raw material production process

1, according to the business of manufacturing high-end or mid-range or low-grade sintered NdFeB requirements, in accordance with national standards for raw ingredients to buy raw materials. 2, advanced production technology directly determines the performance quality of the magnet. The most advanced technology is scale ingot (SC) technology, hydrogen broken (HD) technology and jet mill (JM) technology. Small capacity vacuum induction melting furnace (10kg, 25kg, 50kg) has been a large capacity (100kg, 200kg, 600kg, 800kg) vacuum induction furnace replaced. SC (Strip Casting) quick-setting slab technology has gradually replaced the large slabs (thickness 20-40mm cooling direction than ingot), hydrogen broken (HD) technology and jet mill (JM) to replace the jaw crusher, disk mill, ball mill (wet milling) to ensure the uniformity of the powder, and is conducive to liquid-phase sintering and grain refinement. 3, the magnetic field orientation, our country is the only country two-step pressing of perpendicular alignment with a small pressure molding, and finally the use of quasi-isostatic pressing, which is one of the sintered NdFeB industry's most important features . 4, and monitor the quality of the production process is very important, we can control by SC thickness measurement and JM powder particle size distribution testing methods. Quality products are dependent on control of the production process, but customers will be very confused, how to judge the performance of the product I buy it? China Institute of Metrology has developed a variety of types of permanent magnetic materials technology magnetic parameters measuring instruments. Pulsed magnetic field magnetometer (PFM) is a testing ultra-high coercivity permanent magnet test equipment, mainly in order to adapt to the field of electric vehicles and large-scale permanent magnet motor needs high coercivity neodymium cylinder magnets. Customers can magnet parameters Br (remanence), Hcb (coercivity), Hcj (intrinsic coercivity), (BH) max (maximum energy product) Selected NdFeB grades they need, while four That argument is to determine the product is not manufactured according to customer requirements of the standard.

The magnetic filter installation:

The magnetic grate separator flange connected to the interface with the slurry outlet line, so that a uniform slurry flow from the filter before, after a period of time to try to determine the cleaning cycle.
When cleanup first loosen the clamping screw cover, remove the casing cover member, and then out of the magnet, the iron adsorbed on the sleeve impurities will automatically fall off. First the cannula into the barrel after a clean installation, tighten the clamp screw, then put the lid magnet inserted into the tube, you can continue to use.

The magnetic filter works:

In the liquid slurry transportation process, the slurry through a filter, that is a powerful magnet magnetic drawers action, the slurry of iron impurities are adsorbed on the magnet sleeve, the elimination of slurry of iron impurities, guarantee the next process can effectively control the iron impurities.

Magnetic filter use:

inline magnetic filter is mainly used to remove liquid slurry ferromagnetic impurities, widely used in chemical, pharmaceutical, pigments, dyes, food, metallurgy, ceramics and other industries, this product has a strong magnetic grates force, in addition to the effect of good iron, iron cleanup crumbs and easy.